Get my home cleaned
A cleaner using a hot water extraction wand, the same kind of machine used on mattresses, in an Australian living room

How-to guide

Mattress steam cleaning

Steam clean a mattress yourself with a home steamer, step by step. The rule that matters most: keep the fabric lightly damp, never wet, and let it dry fully before anyone sleeps on it.

Updated 13 November 2026. Health and safety points come from two government sources, listed at the end.

The short answer

Check the care label first, and do not steam memory foam or latex unless the maker allows it. Strip and wash the bedding, vacuum the whole mattress and treat any stains before the heat. Test a hidden spot, then steam in slow, light, overlapping passes with an upholstery attachment, keeping the fabric only damp. Dry it fully with open windows and a fan before the bed is made.

What you need

  • Vacuum with upholstery tool
  • Steamer with upholstery attachment
  • Clean white microfibre cloths
  • Stain treatment and spray bottle
  • Fan or dehumidifier
  • Clean mattress protector
Step by step

How to steam clean a mattress, step by step

Start early on a dry day, with somewhere else to sleep that night in case the mattress is still damp.

  1. Check the care label firstRead the mattress care label or the maker's care advice. If it warns against moisture or steam, do not steam it. Do not steam memory foam, latex or a mostly foam mattress unless the maker allows it.
  2. Strip the bed and wash the beddingTake off the sheets, protector, topper and pillows. Wash the bedding while you work on the mattress, as its care labels allow, with the sheets and pillowcases in water hotter than 60 °C.
  3. Vacuum every part of the mattressVacuum the top, sides, seams, tufts and edges slowly with the upholstery or brush attachment, before any steam goes on. Moisture can turn loose dust into residue on the fabric. If you are allergic to dust mites, see the health advice below.
  4. Treat stains before any steamHeat can set some stains, especially sweat, urine and blood. Test your stain treatment on a hidden spot, then mist on as little as you can and blot with a white cloth. Do not scrub, which can damage the fabric and spread the stain.
  5. Heat the steamer and test a hidden spotFill the steamer as its maker says, often with distilled water, fit the wide upholstery attachment and let it reach full heat. Never use a jet nozzle. Steam a small, hidden patch first and check it before you go on.
  6. Steam in slow, light, overlapping passesKeep the nozzle off the fabric, never pressed onto it, and move slowly in even, overlapping strokes over the whole top. Do not blast one spot. Do the sides and edges too, without forcing steam into the seams.
  7. Keep the fabric damp, never wetCheck it often as you go: it should feel only lightly damp. If water beads, the fabric looks soaked or moisture collects on top, stop at once and start drying that patch. Moisture left in the layers inside can cause musty smells and damage the materials.
  8. Dry it fully, then make the bedOpen the windows and run a fan, with a dehumidifier on a humid day. Keep all bedding off until the top, seams and tufts feel dry, with no cool or damp patches. Then put a clean protector on before the sheets.
What you need

What you need to steam clean a mattress

Get these together before you start.

Vacuum with upholstery tool

A vacuum with an upholstery or soft brush attachment. Vacuuming first lifts the dust and grit that moisture can turn into residue on the fabric.

Steamer with upholstery attachment

A steam cleaner or portable steamer with a wide upholstery attachment, filled with the water its maker recommends, often distilled. Not a carpet cleaner, wet vacuum or steam mop.

Clean white microfibre cloths

Clean white microfibre cloths or absorbent towels, to blot stains rather than scrub them, and to start drying any patch that gets too wet.

Stain treatment and spray bottle

A stain treatment that suits the mattress fabric, and a spray bottle to mist it on lightly so the fabric does not get soaked.

Fan or dehumidifier

A fan to move air through the room while the mattress dries, and a dehumidifier if the day is humid.

Clean mattress protector

A clean, washable mattress protector to put on before the sheets, but only once the mattress is dry right through.

Health and safety

Health advice from government pages

Each point as an Australian government health body puts it.

Better Health Channel

If you are allergic to dust mites

The Better Health Channel says vacuuming causes house dust mite allergens to become airborne for up to 20 minutes, so if you are allergic to dust mites, you should wear a mask or ask someone else to vacuum.

Better Health Channel

Killing dust mites is not enough

The Better Health Channel says hot tumble drying household items will kill house dust mites, but not the allergen they produce, and that the droppings of dead dust mites continue to provoke allergic reactions.

healthdirect

Bed bugs need a pest professional

The healthdirect website says bed bugs are most often found in mattress seams and can be very hard to get rid of. If you think you have a bed bug infestation, it says to call a licensed pest management company for treatment.

By mattress type

Which mattresses can be steam cleaned

How the advice changes by mattress type.

MattressSteam at home?
InnerspringUsually handles light surface steam, if the maker allows it.
Memory foam, latex or mostly foamDo not steam unless the maker approves it. Steam and heat can damage foam, and professionals often use a dry or low-moisture method instead.
HybridTake extra care, as it mixes materials and adhesives. Follow the maker's instructions exactly.
Pillow top or Euro topMore sensitive to moisture and slow to dry. A professional assessment is the safer choice.
No label, or unsure what is insideHave a professional assess it before any steam goes on.

Checked on 12 November 2026.

Where guides differ

Where the guides disagree

Guides split on these points, so here is each side.

Should you steam a mattress at all

Three guides say yes, and two say only where the maker allows it. One mattress maker says steam is not recommended for many mattresses, because it puts heat and moisture into them.

How far to hold the nozzle

One guide says about 15 cm from the fabric, one says 5 to 7 cm, one says a few centimetres and one says to follow the steamer's manual. Two say never to press it onto the fabric.

Cleaning products

One mattress maker says to use only warm water, with no detergents or dry-cleaning chemicals, as they may damage the fabric or the materials inside. Other guides use white vinegar and water, an enzyme cleaner or dishwashing liquid. Test any product on a hidden spot first.

Urine and bed-wetting

One mattress maker uses a steam cleaner on an overnight bed-wetting stain. Two cleaning guides send urine and other body fluids to a professional for enzyme treatment and hot water extraction.

Questions

Mattress steam cleaning: your questions answered

How long does a mattress take to dry after steam cleaning?It depends on the mattress and the weather. Guides give anything from at least 3 hours to 6 to 8 hours or more, and longer for thick materials or in humid weather. A dry surface does not always mean the layers below are dry, so check the seams and tufts before you make the bed.

Official sources

Checked on 13 November 2026.

  1. Better Health Channel, House dust mite
  2. healthdirect, Bed bugs

Get a mattress cleaning quote