Get my home cleaned
A clean grey tiled bathroom with a frameless glass shower screen and a timber vanity

Tile regrouting in Melbourne

Tile regrouting in Melbourne, from a licence-checked local

Shower walls, the shower floor or a whole tiled floor. Tell us the job and one verified local tile and grout business gets in touch.

  • Licence checked and insured
  • Verified by Home Ready Cleaning
  • Matched with a tile and grout cleaning specialist
Get my tiles cleaned → Collective Google Rating4.8500+ reviews
4.8

From 500+ reviews

Verified byHome Ready Cleaning
Why book here

Checked before they get your job

  • Back within the hourA local tile and grout cleaner gets back to you within the hour.
  • Licence checkedWe check each business's licence before it gets jobs.
  • InsuredEvery business we pass jobs to is insured.
  • Verified by Home Ready CleaningLook for the badge. Only verified businesses get your job.

"Very prompt, courteous and reliable, the job was done to perfection."

Pressure cleaningGoogle review

"great result, team turned up on time, were reliable and friendly."

Pressure cleaningGoogle review
What you get

What a tile regrout in Melbourne typically covers

Every business works its own way, so confirm the steps when they call. These are the areas and steps that appear on most regrouting quotes.

A tradesperson in white work gloves spreading fresh grout over the joints of large beige wall tiles with a rubber float

Shower walls and floor

  • Tiles tapped for hollow spots first
  • Old grout cut out with an oscillating tool
  • Joints cleaned and vacuumed out
  • New grout pressed in with a rubber float
  • Grout haze sponged off the tile faces
A hand in a grey rubber glove scrubbing the grout lines of grey floor tiles with a bristle brush, beside a window

Floors

  • Shower floors, where grout usually fails first
  • Bathroom, ensuite and laundry floors
  • Kitchen and living area floors
  • Cracked, crumbling or missing grout replaced
  • Usually priced by the square metre
A bathroom with large grey wall and floor tiles, a frameless glass shower screen over a floor waste and a timber vanity

Silicone joints

  • Old silicone cut out at corners and the floor edge
  • Joints cleaned of old silicone residue
  • Wet-area, mould-resistant silicone run in
  • Screen, taps and floor waste on some lists
  • About 24 hours to cure before the shower is used
A white tiled kitchen splashback behind a steel tap, with a potted basil plant on a stone benchtop

Splashbacks and walls

  • Kitchen splashbacks
  • Bathroom walls outside the shower
  • Cement grout is common in dry areas
  • Small crack repairs in single grout lines
  • A new grout colour, if you want a change

Sometimes included

On some businesses' lists and not others. Ask when you book.

  • New silicone as part of a full regrout
  • A penetrating sealer on new cement grout
  • Sealing around the taps and floor waste
  • Mould treatment before the new grout goes in
  • A moisture check where a leak is suspected
  • A written warranty on the work

Popular add-ons

Typical price range for each.

  • Epoxy instead of cement, one shower$100 to $500
  • Shower silicone replaced, per metre$8 to $35
  • Sealer on new cement grout, per square metre$2 to $12
  • Hollow tiles lifted and re-bedded$150 to $400
  • Cracked tile replaced, per tile$25 to $50
  • Mould treatment$50 to $200

Not part of a regrout

These are separate jobs, often for another trade, or are quoted on their own.

  • Repairing the waterproofing membrane
  • Leaking pipes, taps and mixers
  • Cracked shower bases and trays
  • Retiling a shower or floor
  • Shower screen seals and glass
  • Rotted framing or water damage below
See other cleans in Melbourne →
Time and price

Estimated tile regrouting prices in Melbourne

Regrouting is priced on the size of the job, often by the square metre, so the area and the grout you choose set most of the cost. These are estimates of what to expect. Every business sets its own price.

JobUsual timeEstimated price
Shower floor onlyA few hours$250 to $850
Full showerwalls and floor, standard size4 to 8 hours$250 to $1,850
Large or double showerwalls and floorA full day or more$800 to $2,700
Bathroom or laundry floorabout 10 square metres4 to 8 hours$250 to $900
Kitchen or living floorabout 20 square metres1 to 2 days$500 to $1,700
Re-siliconing one showerno regrout1 to 2 hours$150 to $350

Estimates only, for removing the old grout and regrouting sound ceramic or porcelain tiles in cement or epoxy grout. Mosaic tiles, natural stone, hollow tiles and leak repairs cost more. Every business sets its own price. Estimates checked on 12 November 2026.

What moves the price

Size of the job
Regrouting is often priced by the square metre, and published rates run from about $25 to $85. A bigger shower or floor means more grout to remove and replace.
Tile size
Small and mosaic tiles have far more grout lines per square metre than large tiles, so they take longer. Very narrow or very wide joints add time too.
Cement or epoxy
Epoxy grout costs more and takes more skill to apply, so it usually adds about $100 to $500 to a shower. It does not need sealing and tends to last longer.
The old grout
All the old grout has to come out first. Hard, well-bonded grout takes longer to remove, and mould or large missing sections add preparation.
Hollow or cracked tiles
A hollow-sounding tile has to be lifted and re-bedded before the joints around it are regrouted, which often adds $150 to $400. Cracked tiles are replaced at extra cost.
Silicone and extras
Many full shower jobs include new silicone in the corners and along the floor edge. Ask whether sealing around the taps and floor waste is in the price.
Which regrout

Cement grout, epoxy grout or just the floor?

Three common ways to book a regrout in Melbourne. Ask which grout each quote uses, because it changes the price and how long the result lasts.

The standard, lower-cost grout

Cement grout

Cement grout is the usual lower-cost choice and suits walls and dry areas such as splashbacks. It is porous, so in a shower it needs a penetrating sealer, and it usually lasts about 5 to 10 years there.

Best for walls and dry areas
A two-part resin grout

Epoxy grout

Epoxy does not soak up water, soap and stains the way cement grout does, and it does not need sealing. It costs more and sets fast, so it takes more skill to apply. It often lasts 10 to 15 years or more.

Best for shower floors and busy wet areas
A partial regrout where grout fails first

Shower floor only

The shower floor stays wet longest, and its grout usually fails before the walls. If the wall grout is still sound, regrouting just the floor, often in epoxy, costs less than doing the whole shower.

Best when only the floor grout has failed
On the day

What to expect on regrouting day

How a regrouting visit usually runs, from the first check of the tiles to the wait before the shower is used again.

A single-storey brick home with a concrete path, a young gum tree and red-flowering native shrubs out front

How long it takes

A standard shower usually takes 4 to 8 hours, so most are finished in one day. Silicone replaced on its own takes 1 to 2 hours.

A check first

Many regrouters tap the tiles for hollow spots and check the grout before they start. A hollow tile has to be re-bedded before the joints around it are regrouted.

Old grout out

The old grout is cut out with an oscillating tool, ideally to the full depth of the joint, and the joints are vacuumed. New grout laid over old grout tends to crack and lift.

New grout in

Fresh grout is pressed into the joints with a rubber float and the haze is sponged off the tiles. Epoxy starts to set in about 30 minutes, so it takes quick, careful work.

Silicone last

Once the grout has set, the corners and the floor edge are filled with mould-resistant silicone. These joints move a little, so they get silicone instead of grout.

Keeping it dry

Plan for the shower to be out of use on the day and for 24 to 48 hours after. Keep it dry, with no steam, and skip harsh cleaners for about 72 hours.

Questions

Tile regrouting in Melbourne: your questions answered

Straight answers on price, epoxy, curing, silicone and when a leak needs more than new grout.

How much does tile regrouting cost in Melbourne?As an estimate, regrouting runs $250 to $850 for a shower floor only, $250 to $1,850 for a standard shower, walls and floor, and $250 to $900 for a bathroom or laundry floor of about 10 square metres. Epoxy usually costs more than cement, and hollow tiles or leak repairs add to the price. Every business sets its own price. Tell us the job and a local tile and grout business gets in touch.
How long does regrouting take?A standard shower usually takes 4 to 8 hours of work, so most are done in a day. Plan for the shower to be out of use for another 24 to 48 hours while the grout cures. Replacing the silicone on its own takes 1 to 2 hours, plus about 24 hours to cure.
When can I use the shower again?Usually after 24 to 48 hours. Published times for epoxy run from about 18 to 48 hours, so use the time your installer gives you. New silicone needs about 24 hours, and longer in humid weather. Avoid harsh cleaners on the new grout for about 72 hours.
Should I choose epoxy or cement grout?For a shower floor, many regrouters recommend epoxy. It does not soak up water and stains the way cement grout does, needs no sealing and often lasts 10 to 15 years or more. Cement grout costs less and suits walls and dry areas, but in a shower it needs sealing and usually lasts about 5 to 10 years.
Will regrouting fix my leaking shower?Only if water gets in through cracked grout or old silicone. A leak from a pipe, the shower base or the waterproofing membrane under the tiles needs other work, so get the cause checked. In Victoria, the Building and Plumbing Commission advises hiring a licensed plumber to fix leaking plumbing, and a registered builder to fix building faults that let water into the home.
Can new grout go over the old grout?It is not the usual way. Most regrouters remove the old grout first, because new grout laid over old has nothing solid to bond to and tends to crack and lift within months. If a quote looks very low, ask whether the old grout is being removed or covered over.
Do I need new silicone as well?Often, yes. Silicone fills the corners and the floor edge, where tiles move a little, and published figures put its life at about 2 to 10 years. Mould under old silicone stays until the silicone is cut out. Re-siliconing a shower on its own often costs $150 to $350.
Do I need a regrout or just a clean?Regrout if the grout is cracked, crumbling or missing, scrapes away with a fingernail, or grows mould again within days of a good clean. If the grout is solid but dirty, a tile and grout clean is the cheaper fix.
What if some tiles sound hollow?A tile that sounds hollow when you tap it has lost the bond behind it, and new grout around it will crack as it moves. It has to be lifted, re-bedded and left about 24 hours before the regrout, which often adds $150 to $400.
Can a tiled floor be regrouted, not just a shower?Yes. Bathroom, laundry and kitchen floors are regrouted the same way and are usually priced by the square metre, at about $25 to $85. Cement grout usually takes 24 to 48 hours to cure, so ask when the floor can be walked on.
Does new cement grout need sealing?Usually, yes. Cement grout is porous, so a penetrating sealer goes on once it has fully cured, usually after about 72 hours. It typically adds about $2 to $12 a square metre. Epoxy grout does not need sealing.
Are regrouting businesses insured?Every business we pass jobs to is insured and checked before it gets jobs. It is still fair to ask which grout and silicone they will use and what their warranty covers.

Official sources

Details were checked on 12 November 2026.

  1. Building and Plumbing Commission, Condensation, moisture damage and mould
  2. Building and Plumbing Commission, Waterproofing of wet areas

Ready when you are.

Failed grout, a shower you're unsure about or a move-out, tell us the job once. A verified local tile and grout cleaner gets back to you within the hour.

Get my tiles cleaned →

Get a tile regrouting quote